BASIC SHELVING ASSEMBLY INSTRUCTIONS
Step 1
Lay two angle posts on floor with 1″ flange (short side) down. Bolt top shelf to SIDES of posts in top round hole (round and square holes are on SIDES of posts). Bolt bottom shelf the same way using 1st, 2nd, or no higher than 3rd hole from bottom of post. Repeat bolting process with 3rd and 4th post. Tighten all 8 bolts securely.
Figure 1 shows the correct location of the 1/4″ x 5/8″ Truss Head bolts. The bolts for the top and bottom shelf use the round holes between the square holes. The clips are used to fit the middle shelves. Fit the clips into the square holes in the posts.
STEP 2
Stand unit up and fit 4 clips for each shelf to be used into the square holes (figure 2). Counting the holes from the bottom or top will insure the clips are all at the same level for the shelf to sit properly. Install clips with the “L” shaped finger in the up position. (figure 2) Holding one end of shelf higher place the shelf between the posts into position over desired level of clips. Push each corner of shelf firmly onto clip.
STEP 3
Braces are easiest to install approximately 1/2 to 2/3 up from bottom of post. Hand tighten only until all braces are installed. If installed correctly the overlap of braces will show the location for a 1/4″ bolt to secure brace (figure 4). Level unit and securely tighten all bolts.
STEP 4
Middle shelves are easily adjusted by resetting the clips to a new level. Your new DIXIE shelves will give many years of service!
THANK YOU FOR CHOOSING DIXIE PRODUCTS
Contact Industrial Shelving Manufacturer
Call 713-957-1111 or contact Amoruso Racking online for a fast quote for your shelving and racking needs.
Warehouse Design Assistance & Free Online Tool
Onsight CAD drawings of warehouse layout for pallet rack, widespan and other shelving. We hope we are your last stop for all your pallet rack, widespan shelving, cantilever rack, and file shelving needs!
Our staff is very experienced with racking and shelving issues so feel free to call or contact us online with questions.
Try our free online warehouse design tool where you can easily plan the layout and design of your warehouse, operational space, and shelving and racking needs.
Founded in 1987, Privately Owned & Operated Warehouse Racking Company
Amoruso Racking is a privately held company in business since 1987. Founded by Tom Amoruso, the company has grown into one of the Houston Texas top 100 small businesses and has received several other rewards along the way as well.
To the right you’ll see our latest Employee of the Month, one of our great people who makes Shelving Concepts such a strong company and great place to work.
Tom’s background in installation and sales of office filing systems,warehouse pallet rack, mobile filing and storage systems, industrial metal shelving, cantilever rack has helped the company increase sales every year.
Tom still personally oversees each sale!